DAIWA Rods Air Z Pro 16M More Power

The AIR family represents the absolute highest level of our technology and design capability.

Again, without question the AIR Z pole surpasses its very own supreme standards by bringing additional improvements to the PRO edition.

The latest kit packages, featuring the redesigned Professional kits are key in this upgrade. The pole is supplied with the clever 2.4m Professional 4mm Match Kit (PTK4.0-AU), which itself is near equal length two piece, features a pre bore reinforcement for side pullers plus a PTFE bush and No3 nose cone.

Options start with the More Match which offers ten PTK4.0-AU match kits, of which three include a No4 section. Also supplied is the two section 2.4m cupping kit (PTKCK-AU) with the short 65cm top and a set of cups. Note too that the tip of the 2.4m kits lands in the middle of the cup when it is fitted; such is the detailed refinement of the set up.

The More Power pack is made up of five 4.7mm Commercial Kits (PTK4.7-AU) and five 5.8mm Power Kits (PTK5.8-AU). Additionally, two No4 sections are also provided for deeper water situations. This pack is also rounded off with the 2.4m cupping kit and cups.

The improvements don’t stop there. The slide easy effect of ITS taping now starts at the No4 and continues down to the No8.

Also included, even in the Pole Only is the Super Light PHEX911 extension which as well as taking the pole to the full 16m also gives you fishing length versatility by fitting the last three decorated butt sections.

To round it all off, the pole is packaged with protective EVA end caps, providing a buffer when store in tubes or side by side in a hard case.

So, if the AIR Z Pro was the very best before, it is surely beyond reach of others now.

• Hyper MSG and improved nanoplus carbons
• Bias Carbon V-JOINTα
• All kits cut and fitted with PTFE bushes
• All No3 sections fitted with PTFE nose cone
• Interlastic side puller on power kits
• Section Alignment System
• Choose between More Power and More Match kit packages; featuring Pro Kits
• Diamond Satin on 9, 10, & 11.
• ITS on sections 5, 6, 7 of 13m Version
• Protective EVA end caps
• Supplied with holdall

• 5 x Professional Interlastic Commercial Kit 2.4m 4.7mm
• 5 x Professional Interlastic Power Kit 2.4m 5.8mm
• 2 x No4 Sections
• 1 x Super Light PHEX911 extension
• 1 x Professional Cupping Kit 2.4m (take apart 65cm top)
• 1 x Daiwa Pole Cup Set
• 1 x Holdall